DAA Mini Mr. BulletFeeder Rifle - .223 Rem

DAA Mini Mr. BulletFeeder – Rifle

The DAA Mini Mr. BulletFeeder for rifle calibers is a manual bullet feeding solution, specifically developed for calibers such as .223 Remington, .308 Winchester, and 6.5×55 mm. The system uses a 6-tube magazine capable of holding 70 to 100 bullets depending on caliber and bullet length, feeding them reliably into the seating die.

Features:

• Six-tube magazine: Transparent tubes with integrated steel ball bearings hold and release bullets precisely. When one tube is empty, simply rotate the next into position – in just a second or two.
• Manual filling: Tubes are filled by hand before the session, much like primer tubes. With a bit of practice, one system takes about two minutes to load. Additional tube assemblies are available separately.
• Efficient workflow: Multiple prefilled magazines allow seamless reloading. Perfect for batch processing or higher volume use.
• Compatibility: Fits progressive reloading presses with standard 7/8"-14 die threads, including Dillon XL650, XL750, and RL550.
• Toolhead placement: The bullet feeder requires a station directly after the powder funnel.

Practical notes:

• On the Dillon XL750, the powder bar sits directly above station #4. If using a powder check in station #3 and a bullet feeder in #4, you may encounter interference. DAA recommends using the optional short Dillon powder bar.
• Using this feeder on a Dillon 1050 with a powder check following the feeder may result in alignment issues due to the angle of the funnel. This problem is unique to the 1050.
• No expanding powder funnel is included, as rifle case flaring via the funnel is not possible – it would restrict powder flow. Use an M-die or a separate prep stage to flare rifle brass.

Safer and faster reloading:

The Mini Mr. BulletFeeder saves time and improves safety by eliminating the need to insert bullets manually under the press head. It's ideal for reloaders seeking an affordable alternative to full automation.

Included:

• 1 × 6-tube bullet magazine (preassembled)
• 1 × Bullet seating die
• 3 × Spare steel ball bearings
• 1 × User manual